This is the steps to follow to Flash custom kernel using
1. ODIN
2. Mai77 method
Short PDA Flashing Guide(Odin Method)
- download the .tar file
- install Kies, or Samsung driver pack
- download Odin3 1.84 or 1.85 (download links above)
- stop Kies
- stop all active ADB sessions
- start odin
- power off Your SGY
- boot into download mode
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
- in the PDA field, browse for the kernel tar
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
Mai77 Method
1. Turn off phone and boot into CWM
(Note: To boot into CWM press Vol Up, Home, and Power at the same time and in the stock recovery choose update from zip and select the CWM.zip)
2. Once in the CWM recovery, simply choose install from zip and select KernelUpdate.zip
(Note : Kernel Update.zip looks for a boot.img file in SD card and flashes it)
3. After successful kernel up press power to return to CWM
4. Press Reboot now, and your kernel is updated
0 (mga) puna:
Post a Comment